Local model performance on your hardware

generation:

5.8 tokens/s

prompt processing (prefill):

56.1 tokens/s

quant:

IQ3_XXS (GGUF)

Reported by the source; GPU count, offloading and concurrent requests can change these figures. Prompt-processing speed is input throughput, not time to first token. Check the full setup before comparing.

User reports Qwen3.8-Flash-Next at 5.84 t/s generation and 56.10 t/s prompt processing on an Nvidia P100 16GB. Setup is llama.cpp with IQ3_XXS quant and 80K context, running on an HP Z440 workstation with Intel Xeon E5-1650 v3 and 64GB RAM. The model is a 125B MoE with 6B active parameters, partially offloaded to CPU. User notes it is slow but works for non-time-critical tasks like email sorting and calendar management.

generation:

24.5 tokens/s

quant:

Q4_K_XL (GGUF)

kv:

F16

Reported by the source; GPU count, offloading and concurrent requests can change these figures. Prompt-processing speed is shown only when the source reports it; generation speed cannot tell us time to first token. Check the full setup before comparing.

User benchmarks llama.cpp CUDA patches on two Tesla P100-PCIE-16GB cards, reporting Qwen3.8-27B Q4_K_XL at 24.5 tok/s decode with -sm tensor, up from 22.3 tok/s stock. Setup is llama.cpp b10660 with patches 0001-0012, CUDA 12.4, F16 KV cache, tensor split across two cards. The README also reports Llama-3.1-8B Q4_K_M at 79.57 tok/s on one card (2.03x stock), Qwen3.8-27B pp8192 at 378.7 tok/s, and a real 74,919-token request at 20.92 tok/s with F16 KV versus 16.85 with q8_0. Four concurrent agents reach 20.3 tok/s each (72.9 aggregate).

generation:

32.6 tokens/s

prompt processing (prefill):

493.0 tokens/s

quant:

Q6_K (GGUF)

kv:

q4_0

Reported by the source; GPU count, offloading and concurrent requests can change these figures. Prompt-processing speed is input throughput, not time to first token. Check the full setup before comparing.

User reports Qwen3.8-27B Q6_K at 32.6 t/s decode (tg256, no MTP) on 2x Tesla P100 16GB with tensor split, versus 17.51 t/s upstream at the fork point. Setup is a llama.cpp fork with CUDA work for Pascal (sm_60), q4_0 KV cache, and fp16 math with fp32 accumulation. Prefill pp2048 at 0 context is 493 t/s versus ~250 t/s upstream. With MTP speculative decoding the fork reaches 54 t/s at 2k context and 29-35 t/s at 260k context. Prefill at 260k context is 123 t/s filling and 153 t/s for a question on a loaded context. Perplexity on the gate corpus at -c 4096 is 2.6101.

generation:

110.0 tokens/s

quant:

Q4_0 (GGUF)

kv:

F16

Reported by the source; GPU count, offloading and concurrent requests can change these figures. Prompt-processing speed is shown only when the source reports it; generation speed cannot tell us time to first token. Check the full setup before comparing.

User reports Nemotron-3.5-Lightning-30B-A3B at 110 tok/s writing code on two Tesla P100 16GB cards. Setup is llama.cpp b10970 with Q4_0 weights, F16 KV cache, tensor split across both cards, and the model's built-in MTP draft head at n-max 2. The same model reaches 95 tok/s on prose, 50 tok/s at 128k context, 39 tok/s at 256k, and 16 tok/s at 1M tokens. The study covers 545 speed measurements of 29 models from 2B to 122B parameters, all weights and KV cache in VRAM with no system RAM offload. A 119B MoE model runs 39 tok/s against 4.3 tok/s for a 70B dense model on the same cards. Tensor split makes dense models from 8B up 21-44% faster. A single P100 throttles to 906 MHz and loses 25% under sustained load, while two cards share the heat and lose 5.5%.

generation:

50-60 tokens/s

prompt processing (prefill):

350.0 tokens/s

quant:

Q6_K (GGUF)

Reported by the source; GPU count, offloading and concurrent requests can change these figures. Prompt-processing speed is input throughput, not time to first token. Check the full setup before comparing.

User reports Qwen3.8 27B at 50-60 t/s generation and 350 t/s prefill on 2x Tesla P100 16GB with a custom llama.cpp fork. Setup is llama.cpp with Q6_K quant, 262144 context, batch 32768, ubatch 1024, and MTP speculative decoding. At 260k context, generation is 30-35 t/s and prefill is 110 t/s. GPUs are capped at 175W/250W each and run at 79C with minor thermal throttling; user estimates 5-10% higher numbers with better cooling.

generation:

54-60 tokens/s

prompt processing (prefill):

440-500 tokens/s

quant:

UD_Q4_K_XL (GGUF)

kv:

16bit

Reported by the source; GPU count, offloading and concurrent requests can change these figures. Prompt-processing speed is input throughput, not time to first token. Check the full setup before comparing.

User reports Qwen3.6 35B A3B at 54-60 t/s generation (66-72 t/s on code) on a single Tesla P100 16GB, up from 30-35 t/s prose on an RX 6600 XT. Setup is llama.cpp with shinbunbun patches, UD_Q4_K_XL quant, 16-bit KV cache, MTP speculative decoding, and --n-cpu-moe 22, running 32k context. Prefill is 600 t/s at 0 ctx dropping to 440-500 t/s by 10k. The user notes the P100 is underrated for the price and has a second card coming for full offload.

generation:

85.0 tokens/s

prompt processing (prefill):

300.0 tokens/s

quant:

Q4_K_XL (GGUF)

Reported by the source; GPU count, offloading and concurrent requests can change these figures. Prompt-processing speed is input throughput, not time to first token. Check the full setup before comparing.

User reports Qwen3.6-35B-A3B at ~85 t/s generation and ~300 t/s prompt processing on 2x Tesla P100. Setup is llama.cpp with the Q4_K_XL GGUF, MTP speculative decoding, and community P100 patches that added about 50% decode; a single P100 on Q2_K_XL reached ~76 t/s generation and ~250 t/s prompt processing. Card count barely affects single-stream speed, and PCIe lane width (x16/x16, x16/x8, x8/x8) made no difference. The user corrects an earlier 3-card result that was invalidated by stuck 405 MHz core clocks.

generation:

40.0 tokens/s

quant:

Q6_K (GGUF)

Reported by the source; GPU count, offloading and concurrent requests can change these figures. Prompt-processing speed is shown only when the source reports it; generation speed cannot tell us time to first token. Check the full setup before comparing.

User reports Qwen3.8 27B at 40+ t/s on two Tesla P100s, with a roughly 30 t/s average across long contexts and up to 55 t/s at 0 context. Setup is a custom llama.cpp fork with P100 kernel optimizations, Q6_K quant, both cards capped at 175W and communicating over PCIe gen 3. Speeds vary by about ±2 t/s; the user notes fp16 math saves 40% or more on prefill with negligible accuracy loss.